List of 23 Solutions and 4 Compounds in FTmisc

List of 23 Solutions

1. FTmisc-CdLQ
Cd-liq Liquid Alloy Cd-Zn-Na-Pb; dilute Tl,Ga,O valid only at high Cd content.
(Do not use simultaneously with any other liquid metal phase)

2. FTmisc-CdZn
Solid_Cd-Zn Cd-Zn solid solution. Large miscibility gap (use I option).

3. FTmisc-Cu2S
Cu2S-s.s., rich in Cu2S; dilute PbS,ZnS

4. FTmisc-CuLQ
Cu-liq_or_speiss (presence of Cu not essential). <50% As, <15 mol% S, <10 mol% O
Cu-Pb-Fe-Zn-As-Ni-Au-S-O (Do not use simultaneously with any other liquid metal phase)

5. FTmisc-FeCu
fcc_Fe-Cu solid solution up to approximately 20% Cu.

6. FTmisc-FeLQ
Fe-liq steel(I-H Jung model). Don't use with any other liq metal phase. For
Iron/Steelmaking Processes, not solidification. Fe-rich(not for stainless)

7. FTmisc-FeS_
FeS-liq ; dilute Fe, FeO, MgS, MnS, TiS, Na2S. Valid only at high FeS content.
(Do not select simultaneously with MATT or MAT2 or with any liquid metal phase)

8. FTmisc-HCZT
Liq_Hg-Cd-Zn-Te (Do not use with any other liquid metal phase)
Possible small miscibility gap near 30 mol % Te, 70 mol % Zn (use I option).

9. FTmisc-MATT
Matte Liquid S-Cu-Fe-Ni-Co-Pb-Zn-As Possible miscibility gap (use I option)
(Do not use simultaneously with MAT2 or FeS_)

10. FTmisc-PbLQ
Pb-liq ;dilute Ag,As,Au,Bi,Cu,Fe,Na,O,S,Sb,Sn,Zn. Comp limit > 80 mol % Pb;
Temp range 300 - 1200 C. Do not use with any other liquid metal phase.

11. FTmisc-PbSb
Pb-solid Pb-Sb fcc solution. Valid only near Pb (Pb; dilute Sb).

12. FTmisc-PITZ
Pitzer parameters for concentrated aqueous solution - 96 solutes.
Limited data - consult manual & worked examples concerning missing data.

13. FTmisc-SbLQ
Sb-liq Liquid Alloy Sb-Pb; dilute As,O valid only at high Sb content.
(Do not use simultaneously with any other liquid metal phase)

14. FTmisc-SbPb
Sb-solid Sb-Pb rhombohedral solution. Valid only near Sb (Sb; dilute Pb).

15. FTmisc-SeLQ
Se-liq Liquid Alloy Se-As-Se2Cl2-AsCl3-Te; dilute O,Li,Na,K valid only at
high Se content. (Do not use simultaneously with any other liquid metal phase)

16. FTmisc-SeTe
Solid_Se-Te Se-Te solid solution.

17. FTmisc-SnLQ
Sn-liq ; dilute Al,Ca,Ce,Co,Cr,Cu,Fe,H,Mg,Mo,Na,Ni,O,P,S,Se,Si and Ti.
Do not select simultaneously with any other liquid metal phase.

18. FTmisc-SPHA
Sphalerite ZnS; dilute FeS solid solution (low temperature)

19. FTmisc-TeCZ
Telluride (Cd,Zn)Te(1+-x) non-stoichiometric solid solution.
Do not use simultaneously with TeHg.

20. FTmisc-TeHg
Telluride solid solution (Hg,Cd,Zn)Te
Do not use simultaneously with TECZ.

21. FTmisc-TeLQ
Te-liq Liquid Alloy Te-Se; dilute Pb,Na,O valid only at high Te content.
(Do not use simultaneously with any other liquid metal phase)

22. FTmisc-WURT
Wurtzite ZnS; dilute FeS solid solution (high temperature)

23. FTmisc-ZnLQ
Zn-liq Liquid Alloy Zn-Cd-Na; dilute O. Oxygen valid only at high Zn content.
(Do not use simultaneously with any other liquid metal phase)

List of 4 Compounds

Cu2Ss1-s3FeSs1-s3PbSs
ZnSs1,s2